Ngwa kachasị elu nke Triangle Neodymium Magnets na ụlọ ọrụ ọgbara ọhụrụ

Ọ bụ ezie na magnet neodymium triangle na-enwu n'ime ngwa agụmakwụkwọ, ha na-enwu nke ọma.ike n'eziena-eme nke ọma na injinịa ụlọ ọrụ mmepụta ihe. Na [Aha Ụlọ Ọrụ Gị], anyị na-emepụta magnet triangle ziri ezi nke na-edozi ihe ịma aka dị mgbagwoju anya - site na ihe mmetụta satịlaịtị na-eme ka ọ kwụsie ike ruo na nzacha mineral ndị a na-adịghị ahụkebe. Chọpụta otu ụlọ ọrụ si eji geometry eme ihe maka ihe ọhụrụ dị egwu.

 

1. Sistemụ Ụgbọelu na Satịlaịtị

Nsogbu: Mbelata ụda mkpọtụ n'ebe enweghị ike ndọda.
Uru Triangle:

• Pads Mkpọda Tessellated: Ụdị hexagonal na-amịkọrọ harmonics ma na-ebelata ibu.
• Mgbanwe nke Vertex Lekwasịrị Anya: Na-echekwa ngwa egwu na-enweghị ihe njide igwe (na-ebelata oke mwepụta).
  Nkọwapụta Isi: N52H ọkwa (+150°C kwụsiri ike), mkpuchi Parylene (UV/vacuum proof).

 

2. Ngwakọta Robotik na Akpaaka

Nsogbu: Nhazi ziri ezi, ngwa ngwa nke ndị na-ejide ihe/ndị na-eme ka ihe dị n'akụkụ.
Ngwọta Triangle:

• Jigs Na-ahazi Onwe Ya: Magnets na-etinye ihe ndị dị na ya n'usoro zuru oke nke 30°/60° maka obere ịgbado ọkụ.
• Draịva Modular: Akụkụ rotor triangular na-eme ka moto dị obere, nke nwere ike ịrụ ọrụ nke ọma, nwee ike ịrụ ọrụ nke ọma.
  Ndụmọdụ Injinịa: Ịmegharị magnetị ọtụtụ poolu na-eme ka ike ijidesi ike na nsọtụ site na 40%.

 

3. Foto Ahụike na Biotech

Nsogbu: Ngwa MRI nke dakọtara na ya chọrọ akụkụ ndị na-abụghị ferromagnetic.
Mmepụta ihe ọhụrụ:

• Trays Nlereanya Cryogenic: Triangle N40 nke e ji epoxy kpuchie na-eguzogide nitrogen mmiri -196°C mgbe ha na-ahazi ihe nlele.
• Ngwaọrụ Lab-on-a-Chip: Micro-magnets triangular na-ekewapụ eriri DNA site na ubi magnet.
  Nkọwa dị oke mkpa: Mkpuchi ọlaedo nke kwekọrọ na ISO 13485 na-egbochi mmetọ ihe ndị dị ndụ.

 

4. Ụgbọala Ike na Ọkụ Eletriki

Ihe ịma aka: Mwepụ okpomọkụ na obere injin EV.
Ihe ọhụrụ:

• Usoro Njikwa Okpomọkụ: Ebe a na-esi mmiri ọkụ dị n'akụkụ atọ (nwere magnet ndị e tinyere n'ime ya) na-eme ka mmiri oyi na-asọfe site na ọwa ndị e ji tessel mee.
• Nhazi nke Batrị Cell: Na-eme ka oghere dị n'otu maka mgbochi okpomọkụ na-agba ọsọ.
  Data Arụmọrụ: Triangle N50SH na-arụ ọrụ na 180°C na-efu <5% flux.

 

5. Nzacha na Nhazi Ihe Ụlọ Ọrụ

Nsogbu: Ịkewapụ ọla ndị na-abụghị ferrous na ihe mkpofu eletrọniki.
Jiometrị magnetik:

• Nzacha Vortex: Grid triangle ndị na-agbagharị na-emepụta oghere magnetik na-eme mkpọtụ, na-ewepụ iberibe aluminum/copper.
• Nkewa Elu-Gradient: Oghere dị nkọ na-emepụta oghere ubi ebe a na-ejide obere ihe ndị dị na micron.
  Mkpuchi Dị Mkpa: Epoxy nke e ji Tungsten mee na-eguzogide mmebi slurry.

Mmechi: Jiometrị bụ Uru Ịsọmpi
Magnetị neodymium triangle karịrị ihe ndị bụ isi na-adọrọ mmasị—haonye na-ese ụkpụrụ ụlọ ubi magnetSite n'iji akụkụ eme ihe maka nkwụsi ike, tessellation maka nhazi, na vetices maka itinye ike, ụlọ ọrụ na-enweta:

• Mbelata ibu 30–50% vs. ihe eji ejikọta ígwè
• Ọrụ mmezi na-enweghị ihe mgbochi n'ebe dị ọcha/siri ike
• Ihe ịga nke ọma na njupụta ike na EV na mmeghari ohuru

*Na [Aha Ụlọ Ọrụ Gị], anyị na-agbanwe uru echiche ka ọ bụrụ ROI a na-ahụ anya. Site na ihe nlereanya ruo n'usoro n'ọtụtụ, usoro anyị nke ISO kwadoro na-ekwe nkwa:
✅ ±0.05° nkenke akụkụ (nke laser kwadoro)
✅ Nchedo nchara nke ọkwa ndị agha (MIL-STD-810)
✅ Profaịlụ magnetization ahaziri maka njikarịcha vertex flux *

---

Ihe Mere Ọdịnaya A Ji Arụ Ọrụ Maka Azụmaahịa Gị

1. Na-eme ka magnet ghara ịdị mma: Na-etinye triangle dị kangwọta ndị e mepụtara ọhụrụ, ọ bụghị ngwa ahịa.
2. Na-elekwasị anya na ngalaba bara uru dị elu: Na-arịọ ndị na-azụ ụgbọelu, ndị na-ahụ maka ikuku, na ndị na-azụ ọgwụ (nnukwu ego).
3. Ikike Teknụzụ: Na-eji okwu ndị a kapịrị ọnụ (tessellation, vertex flux, N50SH) iji wulite ntụkwasị obi.
4. Usoro Ngwọta Nsogbu: Ngwa ọ bụla na-amalite site na ihe mgbu ụlọ ọrụ.
5. Nkwalite Na-enweghị Nsogbu: Nkọwapụta/mkpuchi na-egosipụta ike gị nke ọma n'enweghị ire ere siri ike.
6. Njikere zuru ụwa ọnụ: Na-ezere okwu ndị metụtara mpaghara (nke kacha mma maka Amerịka/Europe/Asia/IndiaMART).

Ị chọrọ ime mgbanwe?

• Maka ndị na-agụ akwụkwọ: Tinye akụkụ na ngwa STEM nwere mkpuchi ndị na-akwado nchekwa.
• Maka IndiaMART: Mee ka asambodo BIS/ISO na ebe mbupu mpaghara pụta ìhè.