Me pēhea te whiriwhiri i te mowhiti Neodymium tika: Aratohu Kaihoko Katoa

Whakautu Tere: Ko te whiriwhiri i te aukume mowhiti neodymium tika e whai ana i te tukanga mahi e 7 nga taahiraa:

(1) Tautuhia ngā whakaritenga aukume me te wera mō tō tono ūnga

(2) Kōwhiria te tohu aukume i runga i te BHmax me te mahi coercivity

(3) Tukanga hanga kōwhiri: i whakakorikoria kia pai ai te mahi aukume, i herea kia uaua ai ngā āhuahanga, i werohia kia tika ai te pūoko

(4) Whakaotihia ngā inenga matotoru OD × ID × me ngā āheinga e tika ana

(5) Tauwhāitihia te ahunga aukumetanga: tuaka, porowhita, maha-pou rānei

(6) Kōwhiria he paninga e ōrite ana ki ngā āhuatanga o te taiao mahi

(7) Hangaia he RFQ taipitopito katoa mō tō kaiwhakarato.

Ko te MOQ mō ngā ota taputapu ritenga he 500-1000 ngā wahi. Ko te roa o te wā arahi tauira he 7-10 ngā rā; ko te roa o te wā arahi whakaputa papatipu he 15-20 ngā rā i muri i te whakaaetanga tauira.

Kei roto i tēnei aratohu hoko nā te kaihanga te tukanga whiriwhiri me te hoko katoa mai i te tīmatanga ki te mutunga:

• Ngā tukanga whiriwhiri e whitu ngā taahiraa mai i te whakamāramatanga o ngā whakaritenga tae noa ki te tuku ota

• Whakataurite rākau whakatau: NdFeB kua whakatōkia, kua herea rānei, kua werohia rānei (kāore i te maha ngā rauemi whakataetae e kapi ana)

• Te whakamaoritanga taumata-hangarau o te BL-factor me te tauwehenga permeance (Pc), ngā tawhā matua mō te hoahoa motuka me te aukume pūoko

• Te wehewehenga mārama o ngā kaiārahi utu: me pēhea te hurihanga o te utu mō ia wae i te taumata, te paninga, te rahinga, te manawanui me te tere o ngā wātaka

• Rārangi arowhai RFQ kua rite ki te whakatinana me te rārangi arowhai aromatawai kaiwhakarato

• 10 ngā hapa whakatakotoranga noa i kitea mai i te tirohanga a te kaihanga aukume

 

Hipanga 1: Tautuhia ō Whakaritenga Tono

He maha ngā hapa whakatakotoranga ka puta i mua i te tīpakonga o tētahi tawhā aukume — ka puta mai i ngā whakaritenga mahi kāore i te tino tautuhia mō tō tono ao tūturu.

Ngā Pātai Matua hei Whakautu i mua i te Whakapā atu ki ngā Kaiwhakarato

Whakautuhia ēnei pātai matua i mua i te tuku i ngā RFQ:

• Kei hea tēnei aukume e whakatakotoria ai? (mōta / pūoro / pūoko / hononga aukume / ētahi atu

• He aha ngā āhuatanga o te taiao mahi? (te awhe pāmahana, te haumākū, te pānga matū, te wiri)

• He aha ngā whāinga mahi aukume e hiahiatia ana? (te tauwehenga BL, te kiato rerenga, ngā whakaritenga kaha kukume)

• He aha ngā here ā-tinana mō te wāhi e pā ana? (te whānui o waho mōrahi e whakaaetia ana, te whānui o roto, te matotoru)

• He aha te nui o tō whakapaunga ā-tau? (ka pā ki te kōwhiringa tukanga me te hanganga utu whānui)

• Ko ēhea ngā tiwhikete hanganga ture e hiahiatia ana? (ISO 9001 / IATF 16949 / RoHS / REACH)

Matrix Kōwhiringa Motuhake mō te Taupānga

He rerekē rawa ngā whakaritenga puta noa i ngā whakamahinga. Whakamahia tēnei matihiko tohutoro tere hei whakawhāiti i tō whakatakotoranga taketake:

Tono	Te Tohu i Manakohia	Paninga Pai	Momo Aukumetanga	Awhe OD Noa	Ngā Tawhā Matua
Ngā Motuka BLDC	N42SH / N45SH	Ni‑Cu‑Ni / Epoxy	Pūtoro maha-pou	15-120 mm	Tauwehenga BL, tatau pou
Ngā Kaikōrero / Ngā Wūpāroto	N42 / N45	Ni‑Cu‑Ni	Āki	25-200 mm	BL-factor, mahi THD
Ngā Pūoko / Ngā Kaiwhakawaehere	N35 / N42	Ni‑Cu‑Ni / Konutea	Pūtoro Maha-pou / Tuaka	10-50 mm	te tika o te pou-piko, te ōritetanga o te rerenga
Ngā Hononga Aukume	N42 / N45	Ni‑Cu‑Ni / Epoxy	Pūtoro maha-pou	20-80 mm	te tuku taipana, te mahi āputa hau
Ngā Pūrere Hauora	N35 / N42	Parylene / Koura	Tuariki / Porowhita	5-40 mm	hototahitanga koiora, ma o te mata

 

Hipanga 2: Kia Mārama ki ngā Tawhā Aukume Matua

E rima ngā tawhā matua e whakahaere ana i te mahi a te mowhiti-aukume o te ao tūturu: te tohu aukume, te kaha whakakā, te mau tonu, te tauwehenga permeance me te BL-factor.

Taumata (N35‑N52) me te Hua Pūngao Mōrahi (BHmax)

Ko te tohu aukume te inenga matua mōu, e tautuhi ana i te hua pūngao mōrahi (BHmax):

• N35: BHmax ~35 MGOe — mahi taumata-whakaurunga, utu rauemi iti rawa

• N42: BHmax ~42 MGOe — taurite tino pai mō te nuinga o ngā tono ahumahi

• N48 / N52: BHmax 48‑52 MGOe — tohua mō ngā huihuinga iti-wāhi e hiahia ana kia nui ake te kiato rerenga

Ture whiriwhiri: Kaua e whakanui rawa i ngā māka teitei ake ina taea e te āhuahanga te tāpiri i te rōrahi aukume. He pai rawa atu te utu o te N42 i te N52 ki te kore koe e tino hiahia ki taua putanga rere 25% tāpiri.

Tirohia ā mātou mahi tino paiNgā aukume mowhiti neodymium N52mō ngā tono whakaritenga-uaua.

Te Ātete ki te Pāmahana me te Ātete ki te Whakahaunga (Hcj)

Ko te kaha ā-roto (Hcj) e tautuhi ana i te ātete ki te tango i te aukume, ā, e hono tika ana ki ngā rohe wera:

• Ngā momo paerewa (N35‑N52): te pāmahana mahi tonu mōrahi 80 °C

• Ngā tohu whakamutunga SH (hei tauira, N35SH): te pāmahana mahi tonu mōrahi 150 °C

• Ngā tohu whakamutunga UH (hei tauira 30UH): te pāmahana mahi tonu mōrahi 180 °C

• Ngā tohu whakamutunga EH (eg30EH): te pāmahana mahi tonu mōrahi 200 °C

He aratohu nui: ka heke te kaha o te kaha ki te 3-5% mō ia pikinga pāmahana 10 °C. Mena ka eke tō pāmahana mahi tino teitei ki te 130 °C, tīpakohia he tohu SH kua whakatauria mō te 150 °C, me te pupuri i te tawhē haumaru 20 °C.

Te Pūmautanga (Br) me te Kīanga Rere Aukume

Ko te Remanence (Br) e whakaahua ana i te mātotoru rerenga toenga e puritia ana i muri i te aukumetanga, ā, e whakatakoto tika ana i te kaha o te āputa hau taketake:

• N42 Br noa ~1.3 T; N52 Br noa ~1.45 T

• Br teitei ake → āpure āputa hau kaha ake → tairongo pai ake, putanga taipana rānei o te motuka

• Kotahi noa te tāurunga o te mau tonu: ko te mahi whakamutunga o te āputa hau e whakawhirinaki ana hoki ki te āhua o te aukume me te hoahoa o te ara iahiko aukume.

Tauwehenga Āhua (Pc) — He aha te Hiranga o te Āhuahanga Aukume

E whakaatu ana te tauwehenga permeance (Pc) i te āhua o te āhua o te aukume e hanga ana i tōna pūwāhi mahi i runga i te pihi tango aukume. E whakamārama ana tēnei he aha ngā aukume ōrite-taumata ka taea te whakaputa i ngā mahi tino rerekē i te ao tūturu i ngā āhuatanga ā-tinana rerekē.

• Pc = te roa aukume whai hua / te roa ara iahiko aukume whai hua

• Mō ngā aukume mowhiti, ka tino peia te Pc e te ōwehenga matotoru / (OD‑ID)

• Pc teitei ake → mahi teitei ake te aukume i te pihi B‑H → tata atu te putanga rerenga tūturu ki te Br

• Pc iti ake → mōrearea tango-aunoa teitei ake → ka heke te rerenga i tukuna ki raro iho i te ariā Br

Nā tēnei ka whakamārama he aha "ehara i te mea pai ake te angiangi i ngā wā katoa". He iti ngā uara Pc o ngā aukume mowhiti tino angiangi; ahakoa ngā rauemi kounga teitei, ka kore pea e tutuki te rerenga e hiahiatia ana. I te wā e hoahoa ana i ngā ara iahiko aukume, ka taea e ngā pou me ētahi atu wāhanga maitai te whakanui ake i te Pc o te pūnaha katoa.

BL Factor — Inenga Matua mō ngā Kaihoahoa Mōta

BL-factor = te kiato rerenga-aukume (B) × te roa o te arataki-koiri whai hua (L). Ka whakatakoto tika tēnei tawhā hoahoa-mīhini taketake i te pūmau taipana o te mīhini.

• Te tauwehenga BL teitei ake → te putanga kaha nui ake mō te iahiko whakauru kua hoatu → te taipana motuka teitei ake

• Tauwehenga BL = Br × Ag × N × Lg / g (Ag = horahanga āputa hau; N = tatau pou; Lg = roa o te koiri whai hua; g = whānui o te āputa hau)

• Ka tukuna e te āhua o te mowhiti-aukume te BL-factor teitei ake i te 15-22% ki ngā āhua kōpae ōrite nā te whakamahinga pai o te rerenga.

AtHangarau Fullzen,Ko te BL-factor te mea whakamātautau e tonoa pinepinetia ana e ngā kiritaki kaupapa motuka. Ka ine mātou i ngā uara BL-value mā te whakamahi i ngā taputapu whakamātautau motuhake e whai ana i ngā āhuatanga āputa hau o te ao tūturu.

 

Hipanga 3: Kōwhiria te Tukanga Hanga Tika

He kaha te awe o tō kōwhiringa tukanga hanga ki te putanga aukume, te tika o ngā āhuatanga, te kaha maha-pou me te utu waeine — ka waiho hei tētahi o ō whakataunga tino pānga ki ngā wāhanga tōmua.

NdFeB Whakatōngia — Te Mahi Aukume Mōrahi, Ngā Āhuatanga Paerewa

Ko te NdFeB Sintered te mea e tuku ana i te mahi aukume teitei rawa atu i roto i ngā kōwhiringa aukume tuturu:

• BHmax: 33‑52 MGOe (te mea teitei rawa o ngā tukanga e toru)

• Ngā āhua e tautokona ana: ngā porowhita paerewa, ngā tapawhā, ngā mowhiti, ngā pewa; he herenga miihini ngā āhua uaua

• Te aukumetanga maha-pou: ka taea, engari he iti te maha o ngā pou nā te taputapu hononga aukumetanga (te tikanga ≤ 32 ngā pou)

• Ngā manawanui noa: ID/OD ±0.05 mm; matotoru ±0.02 mm i muri i te huri

• Ngā tono tino pai: ngā motuka, ngā kaikorero, ngā hononga aukume e hiahia ana ki te mahi aukume tino pai.

NdFeB Hononga — Ngā Āhua Uaua me te Kaha Matatau ki te Whakamahi i ngā Pou Maha

Ka kōpeke te NdFeB here i te paura aukume i konatunatua ki te here kapia hei wāhanga āhua kupenga, ka taea ai te hanga i ngā āhua matatini:

• BHmax: 5‑14 MGOe (~30‑50 % o te mahi NdFeB kua whakatōngia)

• Ngā āhua tautoko: ngā kōtaha uaua, ngā wāhanga pakitara angiangi, ngā āhuatanga maha-pou kua whakauruhia

• Te āheinga maha-pou: ka taea te hanga i ngā tauira maha-pou i te wā e pēhia ana/werohia ana, me te kore he hononga aukume tuarua

• Ngā manawanui noa: ±0.02 mm, he piri ake i ngā wāhanga kua whakatōngia paerewa

• Ngā tono tino pai: ngā mowhiti encoder, ngā pūoko, ngā huihuinga e hiahia ana kia neke atu i te 32 ngā pou

Tirohiangā aukume mowhiti neodymium kua hereamō ngā tono maha-pou uaua.

NdFeB Werohanga-Whakakikoruatia — Tino Tika mō ngā Pūoko me ngā Kaiwhakakōnae

Ka whakaranua e te NdFeB i hangaia ki te werohanga te paura aukume me te pūmua kirihou wera hei hanga taputapu werohanga, e tuku ana i te tika o ngā āhuatanga:

• BHmax: 3‑10 MGOe (te iti rawa o ngā whānau tukanga NdFeB e toru)

• Ngā āhua tautoko: ngā āhua tino uaua, te whakaurunga kua tino pokepokea ki ngā wāhanga kirihou

• Te tika o ngā āhuatanga: ka taea te whakatutuki ki te ±0.01 mm

• Whakatauranga wera: e whakahaerehia ana e te matihiko polymer (PPS / nairona), e whakatauria ana i te 180‑200 °C

• Ngā tono tino pai: ngā pūoko, ngā waehere, ngā huihuinga e hiahia ana kia hono tika ki ngā huānga hanganga kirihou.

Rākau Whakatau: Kua Whakatōngia, Kua Herea rānei, Kua Werohangahia rānei

Whakarāpopototanga arorau kōwhiringa:

• Me mahi aukume mōrahi → whiriwhiria te NdFeB kua whakatōkia

• Me whai tauira maha-pou > 32, ā, kāore e tino hira te mahi aukume tihi → whiriwhiria te NdFeB herea

• Me ±0.01 mm te manawanui tino piri, te whakaurunga kirihou kua tino pokepokea rānei → whiriwhiria te NdFeB kua werohia

• He aro nui ki te utu + he āhuahanga paerewa māmā → NdFeB kua whakatōkia (te utu iti rawa mō ia waeine i ngā rahinga nui)

• Āhuahanga tairongo-utu + matatini → NdFeB herea (whakaitihia ngā whakapaunga mīhini tuarua)

 

Hipanga 4: Maukati i ngā Ahu (OD × ID × Matotoru)

Ehara ngā inenga mowhiti-aukume i te tawhā noa. Ka whakatau tika ia i te tohatoha rere, te tauwehenga uruhanga, me te mahi a te hua whakamutunga.

Te Pānga o ia Ahu ki te Mahi Aukume

• Te Diameter o Waho (OD): ka whakanuia e te OD nui ake te rerenga aukume katoa, me te whakanui ake i te taumaha me te utu rauemi

• Diameter o Roto (ID): e whakahaere ana i te taunga o te pou me te whānui o te āputa hau. Ka eke te whakamahinga rere ki te ōwehenga ID/OD o te 0.4-0.6

• Matotoru (H): ka ara ake te Pc me te pūwāhi whakahaere i te mātotorutanga; ka mātotoru te mahi i tua atu i ētahi paepae matotoru.

Tohutohu whaihua: ki te wātea te wāhi miihini, me whakanui te matotoru kaua te whānui o waho — ka nui ake te whakapainga tika o te PC mā te matotoru.

Aratohu Whakatakotoranga Manawanui

• Te manawanui paerewa kua whakatōngia: ID/OD ±0.05 mm; matotoru ±0.05 mm

• Te ātete whenua tino tika kua whakatōngia: ID/OD ±0.02 mm; matotoru ±0.02 mm

• Herea/ werohanga-whakakikoruatia: te tikanga ±0.02 mm, kāore he huri tuarua e hiahiatia ana.

Mā te whakawhāiti i te akomanga manawanui ka tāpirihia te 15-25% ki te utu waeine. Ki te kore ngā pūoko, ngā waehere rānei e hiahia ana kia tika, mā te piri ki ngā manawanui paerewa ka nui ake te whakahekenga utu.

Te Pānga o te Matotoru o te Paninga ki ngā Ahu o te Huihuinga

Mā te whakakikorua ka tāpirihia he matotoru o ngā rauemi ā-tinana ki ngā mata aukume — he mea nui mō ngā huihuinga āputaputa-piri:

• Ni‑Cu‑Ni: 7‑25 μm ia taha → Ka piki te OD ki te 14‑50 μm; Ka whakaiti te ID ki te 14‑50 μm

• Paninga epoxy: 10‑30 μm ia taha → Ka piki ake te OD 20‑60 μm

• Paninga konutea: 4‑12 μm ia taha → Ka piki te OD mā te 8‑24 μm.

Taunakitanga hoahoa: tāpirihia te matotoru o te paninga ki roto i ngā tātaitanga āputa huihuinga. Mō ngā āputa hau he iti iho i te 0.5 mm, whiriwhiria ngā paninga angiangi pērā i te konutea, te Ni‑Cu‑Ni angiangi rānei kia kore ai e pau te āputa nui.

 

Hipanga 5: Tīpakohia te Aronga Aukumetanga

He maha ngā wā ka tohua te ahunga aukumetanga hei whakamutunga, engari ko te kōwhiringa hē ka hua ake he whakaroa nui i te kaupapa.

Axial vs Radial vs Diametric — Ngā Ture Whakatau

• Te Aukumetanga Tuaka: Ngā pou Raki-Tonga i ngā mata o runga me raro; te mea tino noa mō ngā āhua mowhiti papatahi (matotoru < 1/3 OD)

• Te Aukumetanga Pūtoro: Ngā pou e anga ana puta noa i te pakitara diameter o roto-waho; e tika ana mō ngā mowhiti pakitara angiangi (OD/matotoru > 4), e whakamahia whānuitia ana i roto i ngā rotor motuka

• Te Aukumetanga Pūtoro Maha-Pou: Ngā takirua pou N-S tauutuutu huri noa i te porowhita o roto, o waho hoki; he paerewa mō ngā motuka me ngā kaiwhakawaehere.

Ngā aratohu whakatau:

• Aukume papatahi (he iti ake te matotoru i te OD) → tīpakohia te aukume tuaka

• Mowhiti angiangi (OD/matotoru > 4) → tīpakohia te aukumetanga radial

• Taupānga mōta / encoder → tīpakohia te aukumetanga radial maha-pou

• Kāore i te tino mōhio: ko te aukumetanga tuaka te tūāpapa haumaru rawa atu (te taputapu māmā rawa atu, te utu iti rawa atu).

Te Aukumetanga Maha-Pou mō ngā Kaiwhakawaehere me ngā Pūoko

Ngā whakaaro matua mō te hoahoa mowhiti waehere maha-pou:

• Te maha o ngā pou: 16 / 32 / 64 / 128 ngā pou; ko te maha o ngā pou ka nui ake te taumira koki

• Te whakaritenga noa mō te manawanui ki te pou o te mowhiti whakakōwae: ±0.02 mm

• Ko te NdFeB whakakorikori e herea ana ki te ≤ 32 ngā pou e ai ki ngā here o te hononga aukume. Mō ngā whakaritenga > 32-pou, ko te NdFeB piri te mea pai ake (he maha-pou i hangaia i te wā e hangaia ana, kāore e hiahiatia he hononga aukume motuhake).

Ngā Hapa Aukumetanga Noa

• Te āhua o te aukumetanga whakahurihuri: tētahi o ngā hapa e tino kitea ana. Tohua mārama te aronga N/S ki ngā tuhi.

• He whakaritenga mō ngā pou maha, kāore he tau kua tautuhia: he mea hanga motuhake ngā taputapu aukume mō ia tau o ngā pou; me tohua te tau o ngā pou i ia ota.

• Whakaritenga maha-pou me te kore e tohu i te aukumetanga wāhanga-me-te-hōhonutanga katoa: ka huri tēnei i te tohatoha āpure aukume whakamutunga.

 

Hipanga 6: Kōwhiria te Paninga Tika

Ka whakatauritehia te roa o te wā e whakamahia ana hei paninga, te pumau o te taiao, te taunga o te huihuinga, me te utu katoa mō te taunga. Ka hua ake te waikura, ngā raruraru taunga, ngā utu koretake rānei i ngā kōwhiringa paninga kino.

Te Mahere Whakatau Paninga mā te Taiao Whakahaere

• Ngā āhuatanga o roto paerewa: Ni‑Cu‑Ni (paerewa ahumahi, mahi utu taurite pai rawa atu)

• Whakatakotoranga makuku / o waho: Paninga epoxy (ātete matū pai rawa atu)

• Taiao pāmahana teitei (> 150 °C): Paninga epoxy, paninga konumohe rānei

• Kohu tote / taiao moana: Parylene (tino angiangi, ōrite, ātete ki te waikura taumata teitei)

• Taputapu motuka/hauora: Parylene, whakakikorua koura rānei (e pā ana ngā whakaritenga hototahi koiora).

Ripanga Whakataurite Ni‑Cu‑Ni / Konutea / Epoxy / Koura / Parylene

Momo Paninga	Matotoru mō ia taha	Whakatauranga Rehu Tote	Te pāmahana mōrahi	Tāurangi Utu	Taupānga Tino Pai
Ni‑Cu‑Ni	7-25 μm	48 hāora+	200°C	1×	Te whakamahinga paerewa o roto
Konutea	4-12 µm	24 hāora+	150°C	0.8×	Ngā taputapu kaihoko kua arotauhia te utu
Epoxy	10-30 μm	96 hāora+	180°C	1.5×	Ngā taiao makuku/kaha kino ki ngā matū
Koura	5-15 μm	96 hāora+	200°C	5-10×	Ngā taputapu hiko hauora me ngā taputapu hiko teitei
Parylene	5-25 μm	200 hāora+	200°C	3‑5×	Pūmārō kounga teitei / taiao tino kino

Te Matotoru o te Paninga me tōna Pānga ki te Taunga o te Huihuinga

Tirohia anō te Hipanga 4 mō ngā pānga ā-whatu o te matotoru o te paninga:

• Ka tāpirihia e te whakakikoruatanga o ia taha he 7-25 μm → Ka tipu te OD, ka whakaiti te ID → ka whakaiti te āputa hau whai hua

• Me waiho he wāhi mō ngā hanganga whakakikorua ki ngā huihuinga tino tika

• Te rerekētanga ōrite o te paninga whāinga: < 5 %.

Ngā Paerewa Whakamātautau Rehu Tote

Ko te whakamātautau rehu tote te tikanga whakamana paerewa mō te ātete ki te waikura o te paninga:

• Ni‑Cu‑Ni Paerewa: he iti rawa te 48 hāora o te rehu tote, kāore he waikura

• Paninga epoxy: iti rawa 96 hāora te rehu tote

• Parylene: ≥ 200 hāora te rehu tote.

I Fullzen Technology, ka paahitia e tā mātou whakakikorua Ni‑Cu‑Ni taketake ngā whakamātautau rehu tote mō ngā hāora 48. Mō te ātete ki te waikura, ka tūtohu mātou i ngā whakaotinga epoxy, Parylene rānei.

 

Hipanga 7: Mai i te Uiui ki te Tukunga — Te Tukanga Hoko Katoa

Ko ngā whakatakotoranga hangarau he haurua noa iho o te kaupapa. Ko ngā wero o te ao tūturu kei roto i te whakatinanatanga arumoni: te utu, te MOQ, te wā arahi, te whakamana tauira, ngā tiwhikete me te tohu kaiwhakarato. He rerekē ki ngā aratohu whakataetae e mutu ana i te kōwhiringa tawhā, ka kapi tēnei wāhanga i ngā mahi pai o te wāhanga hoko mai i te tirohanga a te kaihanga.

Ngā Mea hei Whakauru ki tō RFQ (Tauira Rārangi Arowhai RFQ)

Mēnā ka tukuna mai ngā mōhiohio katoa, ka taea e mātou te tuku tono i roto i ngā rā mahi e toru. Mēnā kāore i te wātea ngā whakaritenga, ka tāpirihia kia 2-3 ngā wāhanga whakamārama mō ia wāhanga. Whakaurua ēnei kōrero ki tō RFQ:

(1) Momo aukume: aukume mowhiti NdFeB (kua whakatōkia / kua herea / kua werohia)

(2) Ngā Ahu: OD × ID × matotoru i roto i te mm me ngā whakaritenga manawanui

(3) Te taumata aukume: hei tauira, N42SH, ngā whāinga BHmax / Br / Hcj rānei

(4) Ngā whakatakotoranga aukume: tuaka / radial / maha-pou tae atu ki te maha o ngā pou

(5) Te whakaritenga paninga: Ni‑Cu‑Ni / epoxy / konutea / Parylene

(6) Matapihi pāmahana whakahaere: pāmahana mahi iti rawa me te pāmahana mahi mōrahi

(7) Whakaahuatanga tono: hua ūnga me te whakarāpopototanga poto o ngā āhuatanga whakahaere

(8) Te rahinga hoko ā-tau e matapaetia ana

(9) Ngā whakaritenga pūnaha kounga: ISO 9001 / IATF 16949 / RoHS / REACH

(10) Te wā tukunga whāinga.

Te Mārama ki ngā Take Utu — Ngā Mea e Ārahi ana i te Utu mō ia Wāhanga

E ono ngā taurangi matua e whakatau ana i te utu o te mowhiti-aukume:

(1) Te taumata aukume: Ko te utu mō te N52 he 30‑50% te nui ake i te N42; ko ngā tāpiringa pāmahana teitei SH / UH / EH ka tāpiri i te 10‑20% te utu tāpiri.

(2) Te rahi ā-tinana: he nui ake te OD me te matotoru ka pau te nui o ngā rauemi mata, ka piki ake te utu

(3) Te rahinga ota: mā te neke mai i te 1 000 ki te 10 000 ka heke te utu mō ia wae mā te 20‑40%.

(4) Akomanga manawanui: ko te utu mō ngā manawanui tika (±0.02 mm) he 15‑25% te nui ake i ngā manawanui paerewa (±0.05 mm)

(5) Whiriwhiringa paninga: Ko te utu o te Parylene 2‑3 × Ni‑Cu‑Ni; Ko te whakakikorua koura he 5‑10 × Ni‑Cu‑Ni

(6) Te uaua o te aukumetanga: me whakarite ngā taputapu aukumetanga mō ngā tauira maha-pou; ko te utu mō te ota tuatahi he $500‐$3 000.

Kia mōhio: e whakaata ana ēnei i ngā au o te ahumahi whānui. Tonoa he whakatau tata mō ō whakaritenga.

Te Whakamārama mō te MOQ me te Wā Arataki

Ngā wā whakaputa noa me ngā paepae ota iti rawa:

• Tauira paerewa: 7-10 rā te roa o te wā ārahi, kāore he MOQ

• Ngā tauira ritenga e hiahia ana ki ngā taputapu / taputapu hou: 15‑25 rā

• Te Taumahatanga Hanga Papatipu: 500‑1 000 ngā wahi mō ngā whakaritenga ritenga; 2 000‑5 000 ngā wahi mō ngā ota papatipu paerewa

• Te wā ārahi mō te whakaputanga papatipu: 15-20 ngā rā i muri i te whakaaetanga tauira

• Ratonga tere: e wātea ana me te utu tāpiri 30-50%.

Neke atu i te 50,000 ngā waeine mowhiti-aukume e whakaputaina ana e Fullzen Technology ia marama. Ka puritia e mātou ngā rauemi mata hei whakaiti i te rerekētanga o te wā arahi mō ngā ota auau.

Tauira Tukanga Whakaae — Kaua rawa e Peke i tēnei Hipanga Hira

•Ko te whakamana tauira te mea nui rawa atu hei whainga kounga i mua i te whakaputanga papatipu:

•Ka tukuna e te kaihanga ngā tauira me ngā pūrongo whakamātautau katoa (rerenga, ine, tirotiro paninga)

•Ka whakamanahia e te kiritaki ngā tauira i raro i ngā āhuatanga whakahaere o te ao tūturu

•Waitohu i te tauira tohutoro kua whakaaetia

•Ka mahia te whakaputa papatipu i runga anō i te paearu tauira kua hainatia.

Te tūponotanga o te kore whakaae tauira: te kitenga i ngā raruraru kore aukume, te waikura, te taunga rānei i muri i te whakarewatanga o te hanga papatipu. Ko te utu mahi anō ka 10‑100 × te utu ota tauira.

Ngā Tiwhikete Kounga: Te Tikanga Pakihi Whaihua

Ehara ngā tiwhikete i te mea he rawa hokohoko anake — engari he whakahaere tika ēnei i ngā mākete ka taea e tō hua kua oti te uru atu:

• ISO 9001: te tiwhikete pūnaha whakahaere kounga taketake e whakamana ana i ngā rerengamahi hanga paerewa

• IATF 16949: whakaritenga pūnaha kounga mō te rāngai motuka, he mea whakahau mō te tuku waka hiko me ngā wāhanga motuka

• RoHS: te tutuki i ngā whakaritenga matū kua herea, e hiahiatia ana mō te urunga atu ki te mākete o te EU me Amerika Te Raki

• REACH: whakaritenga rēhita matū mō ngā tukunga mākete o te EU

Kei a Fullzen Technology te tiwhikete ISO 9001, ā, kua paahitia e ā mātou hua ngā whakamātautau hanganga ture RoHS me REACH. Mō ngā kiritaki motuka, ka tautoko mātou i ngā rerengamahi e hangai ana ki te IATF 16949 me te tuku tuhinga PPAP Taumata 3.

Me pēhea te aromatawai i tētahi kaiwhakarato mowhiti-aukume (Rārangi Aromatawai a te Kaiwhakarato)

Te rārangi arowhai tohu kaiwhakarato 10-tohu:

(1) Kei te wheketere te tiwhikete ISO 9001?

(2) He tuku tika mai i te wheketere (ehara i te whare hokohoko tuturu)? Tonoa he whakaahua, he taunakitanga ataata rānei mai i te raina whakaputa.

(3) He aha te kaha whakaputa ia marama? Ka taea e te putanga te tautoko i ō hiahia rahinga ā-tau?

(4) Ka taea e rātou te tuku i ngā tukanga NdFeB kua whakatōkia, kua herea me te werohanga kia tino ngāwari ai te kaupapa?

(5) Kaupapa here mō te wā arahi tauira me te utu tauira?

(6) Kei te whakaratohia ngā pūrongo tirotiro katoa mō te tukunga atu (te rere, te rahi, te paninga) me ia uta?

(7) Ka taea e rātou te whakaatu i te ōritetanga o te puranga ki te puranga mā te whakamahi i ngā raraunga whakamātautau whakawhiti-puranga?

(8) Ka taea e rātou te tautoko i ngā tuhinga IATF 16949 me te PPAP mēnā he kaihoko motuka koe?

(9) Te tere o te urupare i muri i te hoko; he tukanga whakatau kua tautuhia mō ngā korenga o te kounga?

(10) He tauira taunakitanga kua whakamātauhia ā rātou i roto i tō umanga e whai ake nei?

Mō ngā mōhiohio e pā ana ki ngā otinga ritenga me ngā whakaritenga taipitopito mōngā mowhiti aukume nui,tēnā tirohia tā mātou whārangi hua.

 

Ngā Hapa Kōwhiringa Noa — Ngā Akoranga mai i te Papa o te Wheketere

Whai muri i te whakahaere i ngā mano tini o ngā mahi whakaputa mowhiti-aukati, ka kitea tonutia e mātou ēnei hapa whakatakotoranga utu nui puta noa i ngā ahumahi:

(1) Te arotahi anake ki te taumata aukume me te kore e aro ki te āputa hau me te hoahoa ara iahiko aukume: ka taea e te huihuinga N42 kua hangaia pai te pai ake i te taputapu N52 kua hoahoa kino.

(2) Te kore aro ki ngā rohe pāmahana whakahaere: mā te whakamahi i te N42 paerewa ki roto i ngā motuka pāmahana teitei ka kore e taea te whakakore i te aukume. Me whakamahi ngā tohu SH / UH mō ēnei āhuatanga.

(3) Kōwhiringa paninga hē: mā te tohu i te Ni‑Cu‑Ni mō te whakaaturanga o waho ka waikura i roto i ngā marama; me whiriwhiri te epoxy, te Parylene rānei.

(4) Te whakahurihanga o te polarity aukume: ko te ngaronga o te tohu N‑S i runga i ngā tuhi ka arahi ki te whakahurihanga o te polarity puranga katoa me te para.

(5) Te titiro ki te pānga ā-ahu o te matotoru o te paninga: Ko te āputa hau 0.5 mm e pau ana i te matotoru o te paninga ka puta te rerekētanga o te koiri reo me te nekehanga o te mahi.

(6) Te whakapoauau i te kaha o te sintered me te connected: te tautuhi i te sintered NdFeB mō ngā tauira maha-pou > 32 (e herea ana e ngā here hononga); ko te NdFeB connected te otinga tika.

(7) Te tuku i ngā mōhiohio RFQ kāore i oti: ka puta he whakaroa whakamārama maha nā ngā tono "mōwhiti tuku" koretake.

(8) Te peke i te whakaaetanga tauira i mua i te whakatakotoranga ota papatipu: ko ngā kore-whakarite i te hanga papatipu ka puta he utu mahi anō tae atu ki te 100 × te whakapaunga tauira.

(9) Te wareware i te ōritetanga o te puranga-ki-te-puranga: te mahi e manakohia ana i te puranga tuatahi i te mea ka neke haere te puranga tuarua; me whai tonu i ngā tuhinga tirotiro whakawhiti-puranga.

(10) Te whakamātau i te mahi miihini tuarua i roto i te whare i runga i ngā aukume: ka puta he pāmahana teitei ā-rohe i te keri, i te tapahi rānei i ngā aukume, ka puta ai te whakakorenga ā-wāhanga o te aukume me te kino o te paninga.

 

Whakatakotoranga Mowhiti Aukume Tohutoro Tere

Ka kohikohia e ēnei ripanga whakakotahi ngā raraunga whakatau matua hei tohutoro tere i te wā e mahi ana i ngā whakaritenga.

Ripanga Whakataurite-Mātauranga

Tau	BHmax (MGOe)	Pr (T)	Te Pāmahana Whakahaere Mōrahi	Te Whakamahinga Noa
N35	35	1.18	80°C	Ngā tono taketake mō te kaupapa whānui
N42	42	1.30	80°C	Whakamahinga whānui (te momo tino whānui kua tohua)
N48	48	1.38	80°C	Ngā huihuinga kaha-teitei
N52	52	1.45	60°C	Pūmārō mahi tino kaha, he iti te wāhi
N42SH	42	1.30	150°C	Ngā motuka me ngā taiao pāmahana teitei
40UH	40	1.27	180°C	Ngā motuka kukume EV

Te Matatini Taupānga-ki-Te-Tohutohu-Ngā-Whārite

Tono	Tukanga e Pai Ana	Te Tohu i Manakohia	Paninga e Manakohia ana	Ngā Tuhipoka Matua
Mōta BLDC	Kua whakatōngia	N42SH	Ni‑Cu‑Ni	Kia mau ki te tawhē haumaru wera 20 °C
Pūorooro	Kua whakatōngia	N42	Ni‑Cu‑Ni	Whakatairangahia te mahi a te BL-factor
Kaiwhakakōwaehere	Herea	Te taumata isotropic	Ni‑Cu‑Ni	Te tika o te pou-whakaeke < 0.02 mm
Pūoko	Werohanga-Whakakikoruatia	Te taumata isotropic	Ni‑Cu‑Ni / Konutea	Te tika o te whārite ±0.01 mm
Pūrere Hauora	Kua whakatōkia / kua herea	N35‑N42	Parylene / Koura	Whakatinanahia ngā whakaritenga hototahi koiora

 

Ngā Pātai Auau

Q: He aha te MOQ noa mō ngā aukume mowhiti neodymium ritenga?

A: Kāore he whakaritenga mō te ota iti rawa mō ngā aukume mowhiti āhua paerewa; ka taea te tīmata i ngā tauira mai i te wahi kotahi. Ko ngā whakaritenga ritenga e hiahia ana ki ngā pokepokea hou, ki ngā taputapu aukume rānei, ka tīmata i te 500-1,000 ngā wahi mō ngā oma whakaputanga tuatahi, me te MOQ whakaputanga papatipu tata ki te 2,000-5,000 ngā wahi i runga i te uaua o te wāhanga. Ka pupuri a Fullzen Technology i ngā rauemi mata mō ngā momo matua hei whakaiti i te rerekētanga o te wā arahi puta noa i ngā rahi ota.

Q: Kia pehea te roa ki te whiwhi i ngā aukume mowhiti ritenga?

A: Ka whāia te wātaka katoa mai i te tīmatanga ki te mutunga ki ngā wāhanga e whā: te whakatau utu i roto i ngā rā mahi e toru; te whakaputa tauira 7-10 rā mō ngā whakaritenga paerewa (15-25 rā mēnā e hiahiatia ana he taputapu hou); te huringa whakaae tauira e whakahaerehia ana e te kiritaki; te whakaputa papatipu 15-20 rā i muri i te whakaae. Te wātaka katoa noa: 3-4 wiki mō ngā tauira, me ētahi atu 2-3 wiki mō te whakaputa papatipu. Kei te wātea te tukatuka tere me te utu tāpiri 30-50%.

Q: He aha ngā mōhiohio me whakarato e au ina tono ana ahau i tētahi whakatau utu mō ngā mowhiti aukume?

A: Me whakauru atu ki tētahi RFQ katoa:

(1) OD × ID × ngā ine matotoru me ngā āheinga;

(2) te tohu NdFeB me te tāpiritanga pāmahana;

(3) te ahunga aukumetanga me te maha o ngā pou;

(4) te whakatakotoranga paninga;

(5) te taiao whakahaere me ngā āhuatanga pāmahana mōrahi;

(6) te whakaahuatanga o te tono;

(7) te rahinga o ia tau e matapaetia ana;

(8) ngā whakaritenga tiwhikete. Mēnā ka tangohia tētahi o ēnei kōrero, ka tāpirihia he 2-3 wāhanga whakamārama i mua i te tukunga o tētahi whakatau utu pumau.

P: Me pēhea taku aromatawai mēnā he pono te kaiwhakarato mowhiti-aukume?

A: Manatokohia ngā paearu matua e rima:

(1) Tiwhikete pūnaha kounga ISO 9001;

(2) IATF 16949 mēnā e whakarato ana i ngā taputapu motuka;

(3) te urunga ki te arotake wheketere (tono whakaahua, ataata rānei mō te raina whakaputa);

(4) te ōritetanga o te mahi tauira puta noa i ngā puranga maha;

(5) te hiahia ki te tuku pūrongo whakamātautau ā-ahu me te aukume katoa mō ia tukunga.

I Fullzen Technology, ka tukuna atu ia ota me tētahi pūrongo tirotiro katoa e pā ana ki te mātotoru o te rerenga, ngā tirotiro i ngā āhuatanga, te manatoko matotoru o te paninga me te tirotiro ā-kanohi.

Q: He aha ngā āhuatanga e pā ana ki te utu o ngā aukume mowhiti neodymium?

A: E ono ngā taurangi e hanga ana i te utu kotahi:

(1) te taumata aukume — he 30‑50% te utu nui ake o te N52 i te N42;

(2) rahi ā-tinana — he nui ake ngā rauemi mata e pau ana i ngā wāhanga OD nui ake me ngā wāhanga matotoru ake;

(3) te rahinga ota — ka heke te utu mō ia wae 20‑40% ina piki ake mai i te 1 000 ki te 10 000 ngā wahi;

(4) ngā whakaritenga mō te manawanui — ko ngā manawanui pakari ake me mahi huri anō, ā, ka piki ake te utu;

(5) kōwhiringa paninga — Ko te utu mō te Parylene he 2‑3 × Ni‑Cu‑Ni;

(6) te uaua o te aukumetanga — me hanga motuhake ngā tauira maha-pou.

Tukuna mai ō taipitopito katoa ki tā mātou tīma hokohoko i roto i ngā hāora 24 hei tono i tētahi whakatau tata.