Aratohu Rahi o te Mowhiti Neodymium: Me pēhea te Kōwhiri i te OD, te ID me te Matotoru mō tō Whakamahinga

Ngā aukume mowhiti NeodymiumE toru ngā inenga: te whānui o waho (OD), te whānui o roto (ID), me te matotoru. Ko ngā OD paerewa kei waenga i te 4mm ki te 100mm+, te ID mai i te 2mm ki te 50mm+, me te matotoru mai i te 1mm ki te 30mm. I Fullzen Technology, ka hangaia e mātou he aukume mowhiti i roto i ngā rahi paerewa katoa me ngā inenga ritenga me te manawanui ±0.05mm — mai i ngā mowhiti taputapu iti 4×2×2mm ki ngā huihuinga motuka nui 100×50×25mm. Ko te kaha tō e whakawhirinaki ana ki ngā inenga me te taumata e toru, ehara i te OD anake.

Nā teHangarau Fullzeni runga i ngā raraunga whakaputa tuturu, e kapi ana i:

• Pūnaha rahi paerewa (OD 4mm–100mm+ / ID 2mm–50mm+ / Matotoru 1mm–30mm)
• Ngā awhe kaha tō, ngā tono noa, me ngā whakaritenga manawanui puta noa i ngā wāhanga rahi rerekē
• Te pānga tūturu o ngā panonitanga ā-ahu ki te kaha aukume (he whanaungatanga kore-raina, me tatau whānui)
• Ngā paearu whaihua hangarau mō ngā rahi ritenga
• He ara whakatau kōwhiringa e rima-taahiraa hei āwhina i a koe ki te kimi wawe i ngā whakaritenga tika

Ahakoa kei te tautuhi koe i ngā ine mō te wā tuatahi mō tētahi tauira, kei te whakarerekē rānei i tētahi hoahoa o nāianei — ka āwhina tēnei aratohu ki te whakaiti i ngā whakawhitiwhiti kōrero.

Te Mahi a ngā Ahu o te Mowhiti Aukume: OD, ID me te Matotoru

E toru ngā āhuatanga o ngā aukume mowhiti. Ko te mārama ki te pānga o ia aukume ki te mahi aukume te tūāpapa o te whakatakotoranga tika.

I runga i ia mowhiti aukume e tukuna ana e mātou, e whakaatu ana te pepa whakaritenga i ngā tau e toru: Te Diameter o Waho (OD) × Te Diameter o Roto (ID) × Te Matotoru (T). Hei tauira, ko te 20×10×5mm te tikanga he 20mm te diameter o waho, 10mm te kōhao waenga, me te 5mm te matotoru.

He maha ngā tohunga hokohoko e pātai ana i tā rātou pātai tuatahi: "He nui ake te OD, he kaha ake te kaha aukume?" Ko te whakautu — ehara i te katoa. Ko te kaha aukume o te aukume mowhiti ka whakatauhia e ngā taha e toru e mahi tahi ana. Ko te whakarerekē i tētahi taha ka whakarerekē i te hanganga ara iahiko aukume.

Diameter o Waho (OD)

Ko te whānui o waho e whakatau ana i te horahanga katoa o te pou aukume. Mā te OD nui ake ka nui ake te horahanga rauemi mō te aukumetanga, ā, e ai ki te ariā ka nui ake te tuanui kaha aukume. Heoi, mā te whakanui ake i te OD ka piki ake te taumaha me te utu, ā, ko te kaha kukume tuturu ka herea hoki e te ID me te matotoru.

• Awhe OD paerewa: 4mm – 100mm (ko te 4mm–30mm te mea e whakamahia whānuitia ana)
• He mea taea ngā OD neke atu i te 100mm, engari e taunaki ana mātou i ngā hoahoa huihuinga wāhanga, i ngā hoahoa aukume maha-pou rānei.
• Te manawanui OD: Paerewa ±0.05mm, ka taea e ngā whakaritenga tika te whakatutuki i te ±0.03mm

Diameter o roto (ID)

Ko te whānui o roto te āhuatanga matua e wehewehe ana i ngā aukume mowhiti mai i ngā aukume kōpae. Ka pā tika te rahi o te ID ki te horahanga whai hua o te mata o te pou aukume — ka nui ake te ID, ka iti ake te horahanga o te pou aukume tuturu, ā, ka iti iho te kaha aukume.

Ko te hoahoa ID e ārahihia ana e ngā whakaritenga huihuinga: te whāngai i te pou, te ara waea, te whakapiri hanganga rānei. Koia te take he maha ngā wā ka "pūmau" te ID, me te whakarerekē i te OD me te matotoru i muri mai hei whakaea i te kaha aukume.

• Awhe ID paerewa: 2mm – 50mm
• Te ōwehenga ID/OD e taunakitia ana: 0.3–0.7. Mā te neke atu i tēnei awhe ka nui te whakaiti i te kaha aukume
• He hoahoa koki motuhake ngā aukume mowhiti totohu i te rohe ID e hiahia ana kia whakaū motuhaketia.

Matotoru

He nui ake te pānga o te matotoru ki te kaha aukume i tā te nuinga o ngā tohunga hokohoko e whakaaro nei. Ka whakanui tika te whakanui i te rerenga aukume, engari he wāhi mātotoru - ki tua atu i tētahi matotoru, ka heke te tipu o te kaha aukume i te mea ka piki haere tonu te utu me te taumaha.

• Awhe matotoru paerewa: 1mm – 30mm
• Angiangi (1–3mm): He pai mō ngā pūoko me ngā taputapu tino tika
• Waenga (4–10mm): Ko te whānuitanga e whakamahia whānuitia ana, e kapi ana i ngā motuka, te pupuri, te wehenga, me ētahi atu tono matua
• Matotoru (10mm+): Ngā motuka nui, ngā taputapu wehewehe aukume, ngā taputapu ahumahi

Ka taea e te Hangarau Fullzen te whakaputa i ngā aukume mowhiti tino tika me te ātete matotoru o te ±0.03mm, e tika ana mō ngā tono motuka me ngā pūoko me ngā whakaritenga ātea huihuinga tino pakari.

Tūtohi Rahi o te Mowhiti Neodymium Katoa

Kei raro nei he tūtohi tohutoro-toru-ahu e kapi ana i te rahi, te kaha kukume, me ngā whakamahinga noa — te momo tūtohi kāore e tukuna ana e te nuinga o ngā pae kaiwhakarato.

Ko ngā raraunga e whai ake nei e ahu mai ana i ngā awhe whakamātautau tuturu mō ngā māka N35-N52. Ko te kaha kukume motuhake e whakawhirinaki ana ki te māka, te huinga ā-ahu, me ngā āhuatanga whakamātautau. Kua kohia e mātou tēnei ripanga hei āwhina i a koe ki te aromatawai tere: te nui o te rahi o tō whāinga, me te hiahia rānei ki te whakarite.

Ngā Aukume Mowhiti Iti (OD 4mm – 20mm)

Ngā kupumatua whāinga: ngā aukume mowhiti neodymium iti, te aukume mowhiti 6mm, te aukume mowhiti 8mm, te aukume mowhiti 10mm, te aukume mowhiti 12mm, te aukume mowhiti 15mm, te aukume mowhiti 20mm

• Ko ngā aukume mowhiti iti e hiahia ana ki ngā manawanui kikī ake (±0.03–0.05mm) nā te iti o ngā āputa huihuinga.
• Ko tēnei awhe rahi tētahi o ngā wāhanga nui rawa atu o te Fullzen Technology, me te kaha whakaputa ia marama neke atu i te 800,000 waeine.
• Mō ngā whakaritenga kei tua atu i ngā whakaritenga paerewa, tirohia ā mātou āheinga mowhiti neodymium ritenga.

Ngā Aukume Mowhiti Waenga (OD 20mm – 50mm)

Ngā kupumatua whāinga: mowhiti aukume neodymium 50mm, mowhiti aukume 25mm, mowhiti aukume 30mm, mowhiti aukume 38mm, mowhiti aukume 40mm, mowhiti aukume 1 inihi

• Ko tēnei whānuitanga rahi te mea tino nui i roto i ngā tono ahumahi, me ngā kiritaki mōtini me te whakaputa hiko neke atu i te 60%
• Ko te 25×12.7×3mm tētahi whakatakotoranga ID 1-inihi e whakamahia whānuitia ana i te mākete o Amerika Te Raki — kei a mātou ngā taputapu kei roto i te toa.
• Mō ngā aukume rahi-waenga teitei ake te mahi, tirohia te mahi kaha kukume oNgā aukume mowhiti neodymium N42

Ngā Aukume Mowhiti Nui (OD 50mm – 100mm+)

• He wero hangarau matua te whakahaere i te ōritetanga o te aukume mō ngā aukume mowhiti nui — Ka whakamahi a Fullzen Technology i ngā tukanga aukume maha-wāhanga hei whakarite i te ōritetanga o te papa aukume
• Mō ngā aukume mowhiti neke atu i te 100mm OD, ka tūtohu mātou kia whakamahia te whakatauira ara iahiko aukume i mua i te whakaoti i ngā inenga.
• Mō ngā taipitopito taipitopito me ngā tukanga whakaritenga mō ngā rahi nui, tirohia te whārangi hua aukume mowhiti neodymium nui.

Ngā aukume mowhiti nuiKo te tikanga, e 5–7 ngā rā mahi e roa ake ai te wā arahi i ngā wāhanga paerewa nā te mea e hiahiatia ana he taputapu motuhake me te whakatikatika i ngā taputapu aukume. Mō ngā ota puranga, ka tūtohu mātou kia tukuna ngā ota 4–6 wiki i mua.

Te Pānga o te Rahi ki te Kaha Tō: He aha te Mea Tino Hiranga

Kāore te rahi me te kaha kukume e whai i tētahi hononga rārangi noa iho. Anei te tikanga o ngā tau mō tō tono.

He maha ngā tohunga hokohoko e pātai tika ana: "E hia kirokaramu ka taea e te aukume 20×10×5mm te pupuri?" Kāore he whakautu kotahi, nā te mea ko te kaha kukume e whakawhirinaki ana ki te huinga o ngā āhuatanga e toru, te kounga o te rauemi, me ngā tikanga whakamātautau.

Ngā Take Matua e Whakatau ana i te Kaha Tō

• Te horahanga o te pou aukume = π/4 × (OD² − ID²): Koinei te tīmatanga tātaitanga matua. Mēnā he nui ake te OD, he iti ake hoki te ID, ka nui ake te horahanga whai hua.
• Te matotoru me te ahunga aukumetanga: Ko te ahunga matotoru te ahunga aukumetanga. Mā te whakanui ake i te matotoru ka taea te whakanui ake i te rerenga aukume, engari he rerekē ngā taumata tipu ki tua atu i te matotoru kukū.
• Te taumata rauemi: Mō ngā inenga ōrite, ka tukuna e te N52 te kaha kume tata ki te 40–50% teitei ake i te N35
• Ngā tikanga whakamātautau: Ka whakahaerehia te whakamātautau kaha kukume paerewa ki tētahi mata maitai ngawari papatahi. I roto i ngā tono tūturu, ka pā te āputa hau, te taratara o te mata, me te pāmahana ki te kaha kukume tūturu.

Ngā Whakaaro Hē Noa

Kua tūtaki mātou ki ētahi whakaaro hē mō ngā āhuatanga whānui i roto i ā mātou mahi o ia rā:

• Pūrākau 1: Ko te OD nui ake te tikanga he kaha ake te kaha kukume → Mena ka piki ake te ID, ka iti pea te horahanga o te pou aukume, ka whakaiti i te kaha kukume
• Pūrākau 2: He pai ake te matotoru → I tua atu i te matotoru matotoru, ka iti noa te pikinga o te kaha aukume i te mea ka piki tonu te utu me te taumaha
• Pūrākau 3: Te rahi o te hanga-whakamuri mai i te kaha kukume → He uara tohutoro noa iho te kaha kukume; me tango te kaha i ngā āhuatanga whakahaere tuturu (te āputa hau/te pāmahana/te wiri)
• Pūrākau 4: He rite te kaha kukume o ngā aukume mowhiti me ngā aukume kōpae o te rahi kotahi → He kōhao waenga o ngā aukume mowhiti, ka iti ake te horahanga pou aukume, nō reira he iti ake te kaha kukume i ngā aukume kōpae o te rahi kotahi

Mena he kaha kukume ūnga motuhake tāu, ka taea e tā mātou tīma hangarau te mahi whakamuri mai i tō herenga ID me ngā tikanga tono hei tatau i te huinga OD me te matotoru tino pai, e whakarato ana i ngā kōwhiringa whai hua e 2–3.

Kōwhiringa Rahi mā te Taupānga

He rerekē ngā whakaritenga rahi mō ia ahumahi. Anei ngā mea e kitea ana e mātou puta noa i ngā ota tūturu i Fullzen Technology.

Ngā Mōta me ngā Pūkaha

• Awhe OD noa: 15mm – 80mm
• Ko te ID ka whakatauhia i te nuinga o te wā e te diameter o te rakau rotor/stator — he uara pumau
• Ka whakatauhia te matotoru e te hoahoa ara iahiko aukume, te nuinga o te wā 5–15mm
• Kōwhiringa tohu: N42–N48 mō ngā motuka BLDC, N45–N52 mō ngā motuka servo
• Ngā whakaritenga matua: Te ōritetanga o te aukumetanga, te hototahitanga o te taurite hihiri, te ātete ki te pāmahana
• Mō ngā tawhā katoa o te aukume mowhiti motuhake mō te motuka, tirohia ngā aukume mowhiti mō ngā motuka me ngā whakaputa hiko

Ngā Pūoko me ngā Taputapu

• Awhe OD noa: 4mm – 20mm
• Ngā whakaritenga manawanui: Tino pakari, te tikanga ±0.03mm
• Matotoru: Angiangi te nuinga, 1–5mm te nuinga
• Kōwhiringa māka: He rawaka te N35–N42 — kāore e hiahiatia he māka teitei rawa
• Ngā whakaritenga matua: Te ōritetanga o ngā āhuatanga, te pumau o ia puranga

Wehenga Aukume

• Awhe OD noa: 30mm – 100mm+
• Matotoru: Matotoru te nuinga, 10–30mm
• Kōwhiringa māka: N35–N42 (te kaupapa matua mō te whai huatanga o te utu)
• Ngā whakaritenga matua: Paninga ātete-waikura (nā te pānga pea ki te wai), te whakahaere utu i ngā rahinga nui

Hononga Aukume me te Pupuri

• Awhe OD noa: 20mm – 60mm
• Ka whakatauhia te ID e ngā whakaritenga whāngai-mā roto o te pou
• Matotoru: Waenga, 5–15mm
• Kōwhiringa tohu: I runga i ngā whakaritenga taipana/kaha tōia e whai ana, N35–N52
• Ngā whakaritenga matua: Te ōritetanga o te kaha aukume i waenga i ngā aukume takirua

Rahi Ritenga me ngā Rahi Paerewa: Āhea me Whakarite

Ka penapena wā me utu ngā rahi paerewa, engari he maha ngā wā e hiahiatia ana ngā ine ritenga mō ngā hoahoa kua tino pai.

Ina Mahi ngā Rahi Paerewa

• Kua hipokina kētia tō huinga ID/OD/matotoru i roto i ngā ripanga rahi i runga ake nei.
• Kāore he hiahia mō te kaha kukume tino nui — he rawaka te taumata paerewa
• He mea nui te wā arahi — me tere te hanga tauira (ngā wāhanga paerewa: 3–5 ngā rā mō ngā tauira)
• Tirotirohia ā mātou whakaritenga paerewa mō ngā aukume mowhiti neodymium katoa

Ina whai tikanga ngā rahi ritenga

• He whakaritenga motuhake tō hoahoa mō te ōwehenga ID/OD kāore e taea e ngā wāhanga paerewa te whakatutuki mō ngā whāinga kaha aukume.
• He iti te wāhi huihuinga, e hiahiatia ana he rahinga kore paerewa
• Me whakarerekē te hanganga rauemi i roto i ngā āhuatanga pāmahana/taiao motuhake.
• He nui te rahinga (neke atu i te 500 ngā wahi) ā, e whakaaetia ana te utu taputapu ritenga mō ia waeine.

Ka tautokohia e te Hangarau Fullzen te whakaritenga rahi-katoa me te rahinga ota iti rawa o te 100 ngā wahi. Te tukanga whakaritenga: te whakaū tuhi → te whakatauira ara iahiko aukume → te tauira → te whakamana i te whakahaerenga paerata → te hanga papatipu. Mai i te tuhi ki te tauira tuatahi, e 7–10 ngā rā mahi te roa.

Ngā Paerewa Manawanui mō ngā Aukume Mowhiti

Ka pā tika te manawanui ki te taunga o te huihuinga me te mahi a te ara iahiko aukume.

Ko te mana whakahaere manawanui mō ngā aukume mowhiti te mea nui hei whakarite i te ōritetanga o te puranga. He rerekē rawa ngā whakaritenga manawanui mō ia tono:

• Manawanui paerewa: ±0.05mm (e kapi ana i te nuinga o ngā tono ahumahi)
• Te manawanui tika: ±0.03mm (ngā pūoko, ngā motuka tika, ngā taputapu hauora)
• Manawanui whānui: ±0.1mm (wehenga aukume, pupuri, me ētahi atu tono kore-tika)

Ko te paerewa mō te tuku a Fullzen Technology he ±0.05mm, ā, e wātea ana te ±0.03mm mō ngā tono tino tika. Ka tirotirohia ia puranga i mua i te tukunga, me ngā pūrongo tirotiro hoki.

Tukanga Kōwhiri Rahi 5-Hipanga

He huarahi pūnaha hei whakawhāiti i te rahi o te mowhiti aukume tika mō tō kaupapa.

I runga i ō mātou wheako ki te mahi ki ngā tohunga hokohoko me ngā miihini, anei te huarahi tere ki te whiriwhiri i te rahi tika:

Hipanga 1: Whakatauhia te herenga ID

Tuatahi, whakaūhia te whānui o te poutū o te huihuinga, te whānui whāngai rānei — koinei te herenga tino uaua, ā, kāore he wāhi mō te whakarerekētanga i te ID.

Hipanga 2: Whakatauhia te kaha kukume, te taipana rānei e hiahiatia ana

I runga i te horopaki o tō tono, whakamāramahia te nui o te kaha pupuri, te nui rānei o te taipana e tika ana kia tukuna.

Hipanga 3: Tīpakohia te taumata rauemi

Whakatauhia te taumata (N35–N52) i runga i te pāmahana whakahaere me ngā whakaritenga mahi. Me whai taumata ātete pāmahana ngā taiao pāmahana teitei.

Hipanga 4: Tātaihia te OD me te huinga matotoru

Me te ID kua whakaukia, whakatauhia te huinga OD me te matotoru e tutuki ana i te whāinga kaha kukume mā te tatau i te ara iahiko aukume, mā te whakatauira rānei. Ka taea e te tīma hangarau a tō kaiwhakarato te āwhina i tēnei mahi.

Hipanga 5: Manatokohia ngā whakaritenga mō te manawanui me te paninga

Whakatauhia te taumata manawanui i runga i te tika o te huihuinga. Kōwhiria te paninga i runga i te taiao mahi (ko te Ni-Cu-Ni te paerewa; ko te epoxy, ko te Parylene rānei te mea e taunakitia ana mō ngā taiao waikura).

Ka taea e te tīma hangarau o Fullzen Technology te whakarato i ngā kōwhiringa rahi e 2–3 kua tūtohutia me te kaha kukume me te whakatau tata i roto i ngā haora 24 o te whiwhinga o tō herenga ID me ngā whakaritenga kaha kukume.

Me pēhea te tono: Mai i ngā whakaritenga ki te tuku

Ko te tukanga tono katoa mō ngā aukume mowhiti i Fullzen Technology.

Kia whakatauhia ngā rahi, he māmā noa te tukanga tono:

1. Tukuna ngā whakaritenga whakatakotoranga (OD×ID×T, māka, paninga, rahinga, manawanui)

2. Ka whakautu mātou me te whakahua utu + te wā arahi i roto i ngā haora 24

3. Whai muri i te whakaū ota, ka tukuna ngā wāhanga paerewa i roto i ngā rā mahi 3–5; ngā wāhanga ritenga i roto i ngā rā mahi 7–15

4. Ngā tauira kore utu e wātea ana mō ngā ota tuatahi (ngā whakaritenga paerewa); me utu he utu taputapu mō ngā tauira ritenga

5. Ngā pūrongo tirotiro whānui me ngā tiwhikete rauemi e whakaratohia ana mō ngā ota puranga

Kei Huizhou, Guangdong te wheketere o Fullzen Technology, ā, neke atu i te 5 miriona aukume mowhiti te kaha whakaputa ia marama puta noa i ngā rahi katoa. Ka tautoko mātou i ngā ota iti (mai i te 100 ngā wahi) me ngā ota nui. Ka kaweake mātou i te tau katoa ki ngā mākete o Ūropi, Amerika, me te Tonga-mā-rāwhiti o Āhia, ā, e mōhio ana mātou ki ngā whakaritenga tiwhikete maha.

Mena kei te wā whiriwhiri koe, ā, kāore koe i te tino mōhio ki ngā inenga motuhake — me kī mai noa mai tō horopaki tono me te kaha kukume ūnga, ā, ka tūtohu tika mai tā mātou tīma hangarau i ngā otinga, ka penapena i tō wā ki te whakamātautau me te hapa.

Ngā Pātai Auau

Q: He aha te rahi o te mowhiti neodymium e whakamahia whānuitia ana?

A: Ko ngā rahi tino noa kei roto i te awhe OD 10mm–30mm me te matotoru 3mm–10mm. Mō ngā tono mōtini, ko te 20×10×5mm me te 25×12.7×5mm kei roto i ngā whakaritenga nui rawa atu ka whakaputaina e mātou ia marama. I Fullzen Technology, neke atu i te 40% o ā mātou tuku mowhiti aukume ko ēnei rahi. Mō ngā tono taputapu me ngā pūoko, ko ngā rahi iti ake pēnei i te 8×4×2mm me te 10×5×3mm te mea noa ake. Ko te rahi pai rawa atu ka whakawhirinaki ki tō here ID me te hiahia kaha kume.

Q: Ka taea e au te tono i tētahi rahi ritenga kāore i roto i tō awhe paerewa?

A: Āe. Ka tautokohia e te Hangarau Fullzen te whakaritenga katoa mō te OD, te ID, me te matotoru. Ko te iti rawa o te ota mō ngā rahi ritenga he 100 ngā wahi. Ko te wā arahi mō ngā tauira ritenga he 7–10 ngā rā mahi. Ka whakaratohia e mātou he whakatauira ara iahiko aukume i mua i te whakaputanga hei whakamana i te mahi. He mea noa ngā rahi ritenga ina kore ngā inenga paerewa e tutuki i ngā whāinga kaha kume motuhake, ina rānei e hiahiatia ana he ōwehenga kore-paerewa mō ngā herenga wāhi huihuinga. Kua hangaia e mātou he aukume mowhiti me te OD tae atu ki te 150mm me te matotoru tae atu ki te 50mm mō ngā tono ahumahi motuhake.

Q: He aha te ātete ka taea e koe te pupuri i ngā aukume mowhiti?

A: Ko te ātete paerewa he ±0.05mm mō ngā inenga katoa (OD, ID, matotoru). Mō ngā tono tino tika pēnei i ngā pūoko, ngā taputapu, me ngā taputapu hauora, ka taea e mātou te whakatutuki i te ātete ±0.03mm. Me whai mahi huri me te tirotiro anō tēnei. Kei roto i ia uta he pūrongo tirotiro inenga katoa me ngā inenga tuturu. Mō ngā ota nui (10,000+ ngā wahi), ka taea e mātou te whakarato raraunga whakahaere tukanga tatauranga e whakaatu ana i te ōritetanga o te inenga puta noa i te puranga.

P: He aha te pānga o te whānui o roto ki te kaha kukume?

A: Ka whakaitihia e te ID nui ake te horahanga pou aukume whai hua, e tatauhia ana ko π/4 × (OD² − ID²). Ka whakaitihia tika tēnei i te kaha kukume. Hei tauira, he tata ki te 30% te iti iho o te kaha kukume o te aukume mowhiti 20×10×5mm i te aukume mowhiti 20×5×5mm o te taumata kotahi. Mō te kaha mōrahi me te OD kua hoatu, kia iti te ID e taea ana e tō huihuinga. Mena kua whakapumautia tō ID e te diameter o te rakau, e ētahi atu here rānei, ka taea e koe te whakatika mā te whakanui ake i te OD, te matotoru rānei, mā te whiriwhiri rānei i tētahi taumata teitei ake pēnei i te N45, i te N52 rānei hei utu mō te N35.

Q: He aha te mowhiti aukume nui rawa atu ka taea e koe te whakaputa?

A: He auau tā mātou hanga i ngā aukume mowhiti tae atu ki te 100mm OD × 50mm ID × 30mm te matotoru. Mō ngā rahi kei tua atu i te 100mm OD, ka tūtohu mātou i ngā hoahoa huihuinga maha-wāhanga, maha-pou rānei. Ko ngā aukume mowhiti kotahi-wahi nui kei runga ake i te 100mm ka pāngia e ngā wero me te aukume ōrite me te mōrearea pakaru nui ake i te wā e whakahaeretia ana. Whakapā mai ki tā mātou tīma hangarau me ō inenga mō te aromatawai whaihua. Ka tohutohu mātou mēnā he pai te hoahoa kotahi-wahi, he pono ake rānei, he iti ake te utu o te huarahi wāhanga.

Q: Āhea ahau me whiriwhiri i te N52 kaua ko te N42, ko te N35 rānei mō taku mowhiti aukume?

A: Kōwhiria te N52 ina he iti ngā herenga wāhi o tō hoahoa engari e hiahiatia ana te kaha aukume mōrahi, ina rānei kāore e taea e ngā taumata iti te whakatutuki i ō whāinga kaha kume, i te kaha rānei o te papa aukume. He 24% te nui ake o te hua pūngao o te N52 i te N42, e āhei ai te whakaiti i te rahi 30% neke atu rānei. Heoi, he nui ake te utu, nō reira ka tūtohu mātou mō ngā tono kounga teitei, mahi-teitei, whakawhāiti rānei. Tirohia ā mātou tono katoaNgā aukume mowhiti neodymium N52ngā whakaritenga mō ētahi atu kōrero.